'Continue', 'Next', 'Yes' or 'OK') and when prompted whether to restart the system always select 'Restart Now'. When prompted with a choice always select the forward progression option (i.e. With the PC2-COMP Express board all three components (Sapera LT, PC2-COMP Drivers and Sapera PC) must be installed and are done so in a descending order as displayed on screen.
The PC2-COMP Express frame grabber board is compatible with 32-bit operating systems only. Follow the installation instructions provided with the PC2-COMP Express to install the board in your system. Installing the PC2-COMP Express Board Software 1.1 Setup The PC2-COMP Express board must be properly installed prior to software installation. 9 Installing the Bandit II Board Software Configuring BIOS Settings Configuring Windows Desktop Properties Installing the Optimet Laser Software IK 5000 QUADRA-CHEK 5ĩ Adding a Digital Camera After the digital camera is mounted to the working stage and connected to the system refer to the camera manufacturer's installation documentation to complete the procedure. 9 Installing the PC2-COMP Express Board Software. 8 Installing the IK 5000 QUADRA-CHEK Software. Software controls and Windows are shown in letter gothic bold type. Fonts used in these instructions Items of special interest or concepts that are emphasized to the user are shown in bold type. For software updating procedures, refer to Updating the IK 5000 software in the IK 5000 QUADRA-CHEK Addendum (ID x). Observe the system requirements as described in Minimum System Requirements above. Software updates The IK 5000 software should only be updated after consultation with the machine manufacturer. To update a previous version refer to Software Updates below. Video Display Unit Windows users rights 1024 x 768 resolution Administrator Backward compatibility The IK 5000 QUADRA-CHEK v3.0.x software version is compatible with several previous versions down to version It can be used to update any prior version starting at version and up.
The Installation Instructions can be dowloaded from Minimum system requirements Component w/o 3D Profiling w/ 3D Profiling PC 2.66 GHz dual-core Pentium 2.8 GHz quad-core Pentium Operating System (OS) Windows XP Windows Vista 32-bit Windows 7 32-bit, Windows 7 64-bit RAM 1GB 2GB Available Hard Disk 500MB 1GB PCI 1 PCI slot and 1 to 3 additional empty slots (depending on the version) Note: PCI Express slot required for PC2-COMP Express frame grabber board. For further information refer to the IK 5000 Installation Instructions (ID ). 1 Software Installation Instructions IK 5000 QUADRA-CHEK Software Version 3.0.x English (en) 3/2013ģ Information contained in this manual This software installation instruction covers the software installation for the IK 5000 Software v3.0.x.
0 kommentar(er)
